Traceur HP DesignJet 120

Wiki

====

![traceur](http://redmine.acolab.fr/attachments/download/64/c779la_c779lb.jpg.jpg)

Désolé pour l'image (obsolète ;) )

Ce traceur usagé nous a été mis de coté par **[JeRecycle Parc](http://www.jerecycleparc.org)**. Il date un peu (1ere mise en vente: 1st May, 2003) et ne semble plus être sur le marché... Mais ça reste un traceur format 24" qui pourra nous servir pour l'impression de plans ou d'affiche!

Après un premier test (mise sous tension et impression de page test A4), il semble que l'encre présente ne circule pas sur dans les buses entre la tête d'impression et les cartouches.

pistes a étudier: http://pindelski.org/Photography/2011/03/03/hp-designjet-an-update/

<blockquote>*I ran a printhead alignment from the front panel (Power+ Cancel 0x, OK3x). It showed no black or lt cyan (or cyan I’m not sure) and I have run the alignment several times with just the faintest bit of improvement. I’m now getting just a little bit of ink from the black and cyan, but I’m nowhere close to good. I’d like to run the Printhead recovery functions – but – the printer is “stuck” in Printhead Alignment mode. When I turn it off and back on it requests paper and then runs the alignment again.*...

>

*Your printheads and/or feed tubes are clogged. Do the simple thing first. Pull one of the bad printheads, wipe it in acetone (careful! Do not soak it in acetone – the plastic will melt) then flush with tap water. Retry. If that fails, access the feed tubes and check for clogs – flush or replace. – Ed.* (réponse du : April 20, 2014 at 8:05 am)

</blockquote>

Specs

-----

[présentation Hp](http://redmine.acolab.fr/attachments/download/66/designjet_120.pdf)

### Résumé..

* Impression Dim: 24" A1

* résolution: 1200dpi

* Dimensions: 1050*400*220 mm

* Poid: 21kg

Docs

----

http://www.hpplotter.co.uk/shop/printers/hp-designjet-120-24-printer-model-a-c7791a

http://www.tonerinkprint.com/Hp%20designjet%20120service%20manual0%20130%20s.pdf

**Service Manual : http://www.lbrty.com/tech/Manuals_DN/DN_10PS_130PSsm.pdf**

Driver

------

### Linux

A tester, pour imprimer avec CUPS: http://www.openprinting.org/printer/HP/HP-DesignJet_120

cdnj500 >> http://www.openprinting.org/download/printing/ghostscript-cdnj500-patches/

### windows (avec wine)

http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=295939&swLangOid=17&swEnvOid=228

Pièces

------

attachment:http://redmine.acolab.fr/attachments/download/67/10ps_20ps_50ps_30_30n.pdf

http://www.partshere.com/models/hpprinters.asp?printer=C7791A