Wiki » Historique » Version 17
Baptiste Pelouas, 27/01/2015 18:17
| 1 | 1 | Baptiste Pelouas | Wiki |
|---|---|---|---|
| 2 | ==== |
||
| 3 | |||
| 4 | 2 | Baptiste Pelouas | |
| 5 | |||
| 6 | 5 | Baptiste Pelouas |  |
| 7 | 2 | Baptiste Pelouas | Désolé pour l'image (obsolète ;) ) |
| 8 | |||
| 9 | 8 | Baptiste Pelouas | Ce traceur usagé nous a été mis de coté par **[JeRecycle Parc](http://www.jerecycleparc.org)**. Il date un peu (1ere mise en vente: 1st May, 2003) et ne semble plus être sur le marché... Mais ça reste un traceur format 24" qui pourra nous servir pour l'impression de plans ou d'affiche! |
| 10 | |||
| 11 | 1 | Baptiste Pelouas | Après un premier test (mise sous tension et impression de page test A4), il semble que l'encre présente ne circule pas sur dans les buses entre la tête d'impression et les cartouches. |
| 12 | |||
| 13 | 13 | Baptiste Pelouas | pistes a étudier: http://pindelski.org/Photography/2011/03/03/hp-designjet-an-update/ |
| 14 | 15 | Baptiste Pelouas | <blockquote>*I ran a printhead alignment from the front panel (Power+ Cancel 0x, OK3x). It showed no black or lt cyan (or cyan I’m not sure) and I have run the alignment several times with just the faintest bit of improvement. I’m now getting just a little bit of ink from the black and cyan, but I’m nowhere close to good. I’d like to run the Printhead recovery functions – but – the printer is “stuck” in Printhead Alignment mode. When I turn it off and back on it requests paper and then runs the alignment again.*... |
| 15 | 16 | Baptiste Pelouas | > |
| 16 | 13 | Baptiste Pelouas | *Your printheads and/or feed tubes are clogged. Do the simple thing first. Pull one of the bad printheads, wipe it in acetone (careful! Do not soak it in acetone – the plastic will melt) then flush with tap water. Retry. If that fails, access the feed tubes and check for clogs – flush or replace. – Ed.* (réponse du : April 20, 2014 at 8:05 am) |
| 17 | 14 | Baptiste Pelouas | </blockquote> |
| 18 | 13 | Baptiste Pelouas | |
| 19 | 1 | Baptiste Pelouas | Specs |
| 20 | ----- |
||
| 21 | 8 | Baptiste Pelouas | |
| 22 | [présentation Hp](http://redmine.acolab.fr/attachments/download/66/designjet_120.pdf) |
||
| 23 | ### Résumé.. |
||
| 24 | * Impression Dim: 24" A1 |
||
| 25 | * résolution: 1200dpi |
||
| 26 | * Dimensions: 1050*400*220 mm |
||
| 27 | * Poid: 21kg |
||
| 28 | 5 | Baptiste Pelouas | |
| 29 | 2 | Baptiste Pelouas | Docs |
| 30 | ---- |
||
| 31 | |||
| 32 | 12 | Baptiste Pelouas | |
| 33 | |||
| 34 | 2 | Baptiste Pelouas | http://www.hpplotter.co.uk/shop/printers/hp-designjet-120-24-printer-model-a-c7791a |
| 35 | 1 | Baptiste Pelouas | |
| 36 | 5 | Baptiste Pelouas | http://www.tonerinkprint.com/Hp%20designjet%20120service%20manual0%20130%20s.pdf |
| 37 | 1 | Baptiste Pelouas | |
| 38 | 12 | Baptiste Pelouas | **Service Manual : http://www.lbrty.com/tech/Manuals_DN/DN_10PS_130PSsm.pdf** |
| 39 | 2 | Baptiste Pelouas | |
| 40 | 17 | Baptiste Pelouas | Driver |
| 41 | ------ |
||
| 42 | |||
| 43 | A tester, pour imprimer avec CUPS: http://www.openprinting.org/printer/HP/HP-DesignJet_120 |
||
| 44 | |||
| 45 | cdnj500 >> http://www.openprinting.org/download/printing/ghostscript-cdnj500-patches/ |
||
| 46 | |||
| 47 | 2 | Baptiste Pelouas | Pièces |
| 48 | ------ |
||
| 49 | |||
| 50 | 11 | Baptiste Pelouas | attachment:http://redmine.acolab.fr/attachments/download/67/10ps_20ps_50ps_30_30n.pdf |
| 51 | 9 | Baptiste Pelouas | |
| 52 | 1 | Baptiste Pelouas | http://www.partshere.com/models/hpprinters.asp?printer=C7791A |